First steps of Secure Edge Gateway creation
Topic
This article discusses the first steps of Secure Edge Gateway creation.
Environment
- Datto Secure Edge
Description
To begin using Datto Secure Edge, the Cloud Gateway must first be created by following the steps below.
1. From the Datto Partner Portal, select Status→ Networking Status.
Figure 1: Datto Partner Portal
2. Select the network from the available list.
Figure 2: Networking Status
3. Under the Manage options, select Secure Edge then click Enable Cloud Gateway.
Figure 3: Enable Cloud Gateway
4. After the Cloud Gateway has been enable, select Service Settings under Secure Edge.
Figure 4: Service Settings
5. Select Cloud Gateway.
Figure 5: Cloud Gateway
6. Flip the Enable slider.
Figure 6: Enable slider
7. Add the Subscriber Subnet, choose a Public DNS Server, and select a Service Location.When completed, click Create Cloud Gateway.
Figure 7: Subscriber information
8. Click Confirm changes.
Figure 8: Confirm changes
9. The Gateway Status will begin connecting and change status to Online when completed.
Figure 9: Online status
